Getting Ready

Install Charging Station

Step 1.

Peel off the backings paper from the bottom of the charging station and place it against a wall on hard surface flooring to prevent sliding when charging.

Step 2.

Clear the objects at least 1.5 meter in front and 1.5 meter to the right and left of the charging station.

Charging your LEGEE

Step 1.

Plug power adapter into the charging station.

Step 2.

Place the round end of the robot against the metal contacts on the station. Before the first time of use, fully charge the battery for at least 4 hours until green light ON.

Trun On/Off the Device

Lift open the cover and press down the power switch ┃ .

Attach / Change Cleaning Cloth

Attach the cleaning cloth to the device flatly. (as indicated by the red line below)

Install Side Brush

Press the side brush to the device to install untill hearing the click sound.

Fill Water/Detergent

Fill water or LEGEE detergent to the water tank by using the supplied bottle and seal the water tank with the plug after filling.

Take off the damp cleaning cloth

Please take off the damp cleaning cloth after cleaning to avoid odor after long contacting.

Remote Control

Spray Water Once

Dry/Wet Mopping

Manually Control

Stop Cleaning

Start Talent Clean: Kitchen Mode

Vacuum Power: 5 levels

Return Charging Station

Auto Cleaning Route: Start/Pause

Wall-follow Cleaning Route

LED Indication