Instructions
Instructions
Setup
-
Connect the adaptor to DC power cord.
-
Connect the adaptor to AC power cord.
-
Plug L-shape connector into DC power jack on HOBOT and screw tight the L-shape connector.
-
Plug AC power cord into the socket.
 
Charging the Battery
Make sure the battery is fully charged (green light ON) before use:
-
Turn off the power switch on HOBOT and then plug it into a power source.
-
Orange light ON means charging. Green light ON means the battery is fully charged.
Put on the Cleaning Cloth
Make sure to put the cleaning cloth onto the device flatly to avoid air leakage.
 -
HOBOT has 2-laser sensors for detecting glass edge. These laser sensors cannot be covered by cleaning cloth like as shown.
-
Put cleaning cloth onto device flatly and do not let cloth cover the caterpillar wheel and laser sensors.
Safety Procedures
-
For windows with no balcony, a warning area must be established on the ground below to prevent people from coming near it.
-
Please check if the safety rope is broken or the knot is loose.
-
Fasten the safety rope and tie to an indoor fixture before using HOBOT.
    
Fill the Water Tank
Fill the water tank only with pure water or HOBOT window detergent to the “MAX” line and tighten the lid.
Put HOBOT onto the glass
-
Turn power switch on. Make sure fan is running.
-
Put HOBOT onto the glass and keep 10cm away from the edge.
-
Check if HOBOT is sticking to the glass before releasing it.
Cleaning with Auto Mode and Manual Mode
-
Press auto clean buttons , HOBOT will automatically clean the entire window.
  
-
Press OK or STOP buttons to stop HOBOT.
 
-
Press maunual control buttons to manually control HOBOT’s moving direction.

Finish and Remove HOBOT from Glass
-
Hold the safety rope with one hand and grasp HOBOT tightly with the other hand to remove HOBOT off the glass.
-
Switch off HOBOT in a safe area.

Remote Control and App Control
HOBOT can be remote controlled from the front and back sides.
 
Zigzag, then N-way auto-clean entire window
 
move LEFT then Zigzag auto-clean the rest window
 
move RIGHT then Zigzag auto-clean the rest window
 
N-way auto-clean entire window
 
move UP then N-way auto-clean the rest window
 
move DOWN then in N-way auto-clean the rest window

Manually Control
 
Stop Cleaning

Clean Twice

Spray Water: on/off
|