img

Instructions

Instructions

Setup

  1. Connect the adaptor to DC power cord.
  2. Connect the adaptor to AC power cord.
  3. Plug L-shape connector into DC power jack on HOBOT and screw tight the L-shape connector.
  4. Plug AC power cord into the socket.
img img

Charging the Battery

Make sure the battery is fully charged (green light ON) before use:

  1. Turn off the power switch on HOBOT and then plug it into a power source.
  2. Orange light ON means charging. Green light ON means the battery is fully charged.

Install Cleaning Cloth and Cleaning Ring

Make sure the cleaning ring is perfectly covered by the cleaning cloth and attach the cleaning ring to the cleaning wheel correctly to avoid air leakage.

img Safety Procedures
  1. For windows with no balcony, a warning area must be established on the ground below to prevent people from coming near it.
  2. Please check if the safety rope is broken or the knot is loose.
  3. Fasten the safety rope and tie to an indoor fixture before using HOBOT.
img img img img img Put HOBOT onto the glass
  1. Turn power switch on. Make sure fan is running.
  2. Put HOBOT onto the glass and keep 10cm away from the edge.
  3. Check if HOBOT is sticking to the glass before releasing it.

Cleaning with Auto Mode and Manual Mode

  • Press auto clean buttons , HOBOT will automatically clean the entire window.
    img img img
  • Press OK or STOP buttons to stop HOBOT.
    img img
  • Press maunual control buttons to manually control HOBOT’s moving direction.
    img

Finish and Remove HOBOT from Glass

  1. Hold the safety rope with one hand and grasp HOBOT tightly with the other hand to remove HOBOT off the glass.
  2. Switch off HOBOT in a safe area.
img

Remote Control and App Control

HOBOT can be remote controlled from the front and back sides.

img img

Auto Cleaning: up then down

img img

Auto Cleaning: left then down

img img

Auto Cleaning: right then down

img

Manually Control

img img

Stop Cleaning

img

Clean Twice