Install Charging Station
Peel off the backings paper from the bottom of the charging station and place it against a wall on hard surface flooring to prevent sliding when charging.
Clear the objects at least 1.5 meter in front and 1.5 meter to the right and left of the charging station.
Charging your LEGEE
Plug power adapter into the charging station.
Place the round end of the robot against the metal contacts on the station. Before the first time of use, fully charge the battery for at least 4 hours until green light ON.
Trun On/Off the Device
Lift open the cover and press down the power switch
Attach / Change Cleaning Cloth
Attach the cleaning cloth to the device flatly. (as indicated by the red line below)
Install Side Brush
Press the side brush to the device to install untill hearing the click sound.
Fill water or LEGEE detergent to the water tank by using the supplied bottle and seal the water tank with the plug after filling.
Take off the damp cleaning cloth
Please take off the damp cleaning cloth after cleaning to avoid odor after long contacting.
Spray Water Once
Start Talent Clean: Kitchen Mode
Vacuum Power: 5 levels
Return Charging Station
Auto Cleaning Route: Start/Pause
Wall-follow Cleaning Route
Solid: Dry mopping
Solid: Wet mopping
Flashing: Spraying water
Flashing: Low battery
Flashing: Searching for charging station
Solid: Battery charging
Solid: Battery fully charged
Flashing: Hardware failure code (contact your local dealers for help)