img

App Instructions

LEGEE App not only supports dynamic control, scheduler and real time map with Map Memory, Room Divider and Virtual Barrier, but also brings floor cleaning robot to a new era by introducing its signature feature: “Talent Clean”There are 7 specialized cleaning modes and 1 customized mode for you to serve any special needs. To Achieve the best cleaning result, you can assign different Talent modes in accordance to the room condition.

LEGEE Panel
img

LEGEE is online.

img

LEGEE is offline.
Please make sure LEGEE is connected to the Wi-Fi network with consistent coverage.

img

Remove this LEGEE from your HOBOT account.
Please note, all current settings such as customized talent clean, schedules, creative voice and map data will not be erased, you will need to reset LEGEE to factory default under LEGEE’s Maintain & Manage.

img

Manage HOBOT LEGEE App: App version information, switch between metric systems, App service agreement and language selection.

img

Setup Information: HOBOT Account and Add a new LEGEE.

img HOBOT Account

HOBOT account only stores LEGEE’s device initial name, while all the data in the schedule queue, cleaning diary, memorized maps and all customized setting are stored in LEGEE and will never be accessed via HOBOT account.
When you log in to your HOBOT account in another smartphone, HOBOT account will help you to link to the devices that associate to your HOBOT account and retrieve the data stored in your LEGEE for you.
A LEGEE can only be connected to a HOBOT account, when LEGEE is connected to a new HOBOT account, it will disconnect the old HOBOT account.
Please follow the app instruction to create a HOBOT account to add your LEGEE.
You may delete your HOBOT account if you no longer need it afterwards.
Please note all current settings such as customized talent clean, schedules, creative voice and map data will not be erased, you will need to reset LEGEE to factory default under LEGEE’s Maintain & Manage.
If you want to erase the data in LEGEE’s memory, please reset LEGEE to factory default.

img Add a new LEGEE

Step 1.

Please note below check points:

  • LEGEE supports 2.4G and 5G Wi-Fi connection.
  • Please turn on the Bluetooth function on your smartphone.
  • Please turn on the power of the LEGEE you want to connect.
  • Please make sure LEGEE and the smartphone are both under same Wi-Fi network with consistent Wi-Fi coverage.
  • Please turn on Wi-Fi function on your smartphone and connect.

Step 2.

Tap ➕ and select your LEGEE model to start adding LEGEE.

Step 3.

Lift open the cover and press down the power switch┃.

img

Step 4.

Please press ⏯ on LEGEE for 3 seconds until hearing beep sound and seeing LED indicator shows white light.

img

Step 5.

Enter Wi-Fi name and password.
HOBOT LEGEE App will automatically send Wi-Fi information to LEGEE via Bluetooth to trigger the connecting process.

Step 6.

Please follow the instruction on App to proceed.

Step 7.

Please name your LEGEE.

Step 8.

You LEGEE will appear on the robot list

img Siri

Please tap Siri icon to access the available Siri commands. You can tap each command to adjust the script or activate/deactivate.

img
img Ok Google

Step 1.

Please search HOBOT LEGEE under Google Assistant App: Home control.

img img

Step 2.

Log in with your HOBOT Account and tap your LEGEE model.

Step 3.

You can use the available Ok Google commands to voice control your LEGEE.

img Creative Voice

Step 1.

Please tap Creative Voice icon to access the available voice prompt phrases.

img

Step 2.

Please tap the icon to start or end the recording.

img img

img Talent Clean
img

There are 7 Talent Clean modes: Standard, Strong, ECO, Stain Remover, Dry, Pet and Polish; 1 customized mode for you to serve any special needs. To Achieve the best cleaning result, you can assign different Talent modes in accordance to the room condition.


img

Standard Mode

The standard mode can serve your general needs, if you don’t know which mode you need, you can try standard mode first.


img

Strong Mode

When you want to do some deep cleaning to your floor, strong mode will back you with the maximized vacuum power and higher mopping frequency for best result!


img

ECO Mode

ECO mode works under low power consumption with the minimum vacuum power and lowest mopping frequency, so you can still have the floor cleaned while enjoying the calm and quiet time.


img

Stain Remover Mode

HOBOT exclusive patent. Specialized to clean the stubborn stains we often left behind on the floor. LEGEE will first divide the area to 1.5m×1.5m and spray generous amount of water to dissolve the stains, then go back to mop and absorb the dissolved stains, the floor will be world-class clean!


img

Dry Mode

Dry mode is suitable for those moisture sensitive hard wood floor, the water spray function is disabled and vacuum power is slightly enhanced with slowed down pace so your floor can still get cleaned well without water.


img

Pet Mode

Cleaning pets’ hair haven’t been easier! Under pet mode, the vacuum power is increased to collect light hairs. Also, the increased water spray volume and higher mopping frequency can remove pawprints or stains on the floor.


img

Polish Mode

LEGEE will clean the floor by increasing water spray volume and mopping frequency while lowering moving speed to remove old dirt and water marks on the floor, your floor will soon be restored to bright and shine!


img

Customized Mode

If you have some special needs or just simply curious, you are very welcome to be creative and explore all the possible combinations and build your ultimate cleaning mode!

img Cleaning Diary

Cleaning Diary allows you to check and share the information from the past 10 cleaning tasks, including the cleaned rooms, finished map, cleaned area, cleaning duration and if the task was completed.

img img
img Schedule Queue

Schedule Queue includes a weekly based scheduler that allows pre-scheduling your cleaning plan once a day, and a onetime scheduler for the non-repetitive task; you can select the rooms you want to clean and the cleaning mode you want to use when setting up the schedule.

Please note LEGEE must be switched on and not under low battery status or Do not Disturb time or already cleaning to proceed scheduled cleaning.

img img
img Maintain & Manage

Beside understanding the general maintenance information, you can also manage the voice prompt and do not disturb time setting, check/update the firmware version, re-name your LEGEE or reset your LEGEE to factory default by erasing all current schedules, maps and customized talent clean settings.

General Maintenance
img

Water tank has water

img

Water tank is empty

img

Water tank is clogged

img

Trash bin is not full

img

Trash bin is full

Voice Prompt Setting

You can download the available voice prompt pack so LEGEE can speak different languages, personalize your LEGEE with Creative Voice, adjust the volume and set the do not disturb time.
Please make sure to stop LEGEE when you need to download a new voice prompt pack or record the creative voice.
You can set a Do not Disturb Time period on daily basis so LEGEE will not disturb when you need a quiet time.
LEGEE will complete the un-finished tasks but recharge and resume, scheduled tasks and voice prompt will be disabled during the Do not Disturb time.
If you decide to start LEGEE during the Do not Disturb Time, it will just operate without the voice prompt.

Voice Memo

LEGEE can become your household assistant with its Voice Memo function!
It allows you to record or use an existing audio file from your phone and later play out a voice message at the time of your choice. Each maximum 20-second memo can be repeatingly played up to 10 times with up to 999-second gaps.

Manage LEGEE

You can update the firmware to keep your LEGEE in best performance, rename your LEGEE, adjust Customized Mode parameters, reset your LEGEE and report an issue to get support.
LEGEE must be stopped when updating the firmware, the update will take a few minutes, please do not leave the updating page in the app during that time.
You can reset your LEGEE to factory default, all current settings such as customized talent clean, schedules, creative voice and map data will be erased.


Real Time Map and Data

Real Time Map shows the cleaned area simultaneously as LEGEE cleans. You can pinch to zoom in or out to monitor the coverage and the progress easily. If you have a default map, it will be displayed with the divided areas, virtual barriers and virtual boxes.

img

Cleaned Area

img

Cleaning Duration

img

Battery Level

Quick Keys
img

Stop and return to charging station

img

Stop

img img

Start/Pause

img

Map Settings
LEGEE can store up to 5 maps, after a complete cleaning cycle (start from the charging station, clean thoroughly and return to the charging station), LEGEE will automatically define the different areas in the map and ask to save the Map.
Besides managing and editing the memorized maps, you can also set the cleaning area and cleaning mode to start a new task.

img

App Remote Control

img Edit Default Map

You can set or schedule the cleaning tasks by assigning different cleaning modes and orders to different areas based on the default map.
To proceed selective cleaning, you must start from the charging station. Please make sure the charging station is powered and LEGEE is attached to it.
Please reset the schedule queue for selective cleaning after changing the default map.

Virtual Barrier or Virtual Box
img img
  • You can use Virtual Barrier or Virtual Box to define the restricted zones in your map.
  • Please drag and drop the Virtual Barrier or Box to move.
  • Tap the squares to adjust the size.
  • Tap × to cancel.
  • Please avoid blocking the area around the charging station.
Area Editor
img img img
  • You can rename, merge or split to adjust the areas. The scheduled cleaning task will be erased after rename, merge or split the area.
  • Please tap the area to rename
  • Please tap the neighboring areas to merge.
  • Please tap the area to split, the splitting line needs to cut across the selected area to split the area completely.