Getting Ready
Install Charging Station and Waterproof Mat
Step 1.
Peel off the backing paper from the adhesive side of the waterproof mat and place it right against the wall.
Step 2.
Peel off the backings paper from the bottom of the charging station and place it against a wall on hard surface flooring to prevent sliding when charging.
Step 3.
Clear the objects at least 1.5 meter in front and 1.5 meter to the right and left of the charging station.
Charging your LEGEE
Step 1.
Plug power adapter into the charging station.
Step 2.
Place the round end of the robot against the metal contacts on the station, before the first time of use, fully charge the battery for at least 6 hours until green light ON.
Trun On/Off the Device
Lift open the cover and press down the power switch┃.
Attach / Change Cleaning Cloth
Attach the cleaning cloth to the device flatly, as indicated by the red line below.
Install Side Brush
Press the side brush to the device to install until hearing the click sound.
Fill Water/Detergent
Fill water or LEGEE detergent to the water tank by using the supplied bottle and seal the water tank with the plug after filling.
Take off the damp cleaning cloth
Please take off the damp cleaning cloth after cleaning to avoid odor after long contacting.
Buttons on LEGEE
Auto Cleaning Route: Start/Pause
Start Talent Clean: Polish Mode
Start Talent Clean: Strong Mode
Return Charging Station
LED Indication
Solid: Dry mopping
Solid: Wet mopping
Flashing: Spraying water
Flashing: Low battery
Flashing: Searching for charging station
Solid: Battery charging
Solid: Battery fully charged
Flashing: Connecting
|